Top Quality Latex Beds Reviews & Ratings for 2021

If you are looking for a mattress for your bed that is as natural as possible and yet do not want to do without ergonomic lounging and comfort, you will find that you cannot do much wrong with a latex mattress.

Many people say that they are far superior to foam or spring mattresses and are characterized by a particularly elastic core with excellent body adaptation. Additionally, they have a robust depressurizing effect.

As a result, the body is well supported and can relax. You can see why many people haven’t looked back since switching things up in the bedroom.

With a high proportion of organic latex, this type of sleeping surface is also naturally antibacterial and thus ideally suited for allergy sufferers.

Also regarding moisture management, the natural properties are by no means inferior to other materials; in conjunction with the cover, it absorbs the sleeper’s moisture overnight and effortlessly releases it to the environment the next day.

Latex differs in synthetic and natural rubber, and blended products of both. The latter option gets the best out of both worlds. On the surface, artificial and natural latex can hardly be distinguished.

Read on for more information on our top Latex mattress picks, the various types of materials, prices and more. After reading, you should be able to decide whether a latex bed is for you. If that doesn’t help, see our ultimate buyer’s guide here.

Latex Foam Bed Buyer’s Guide

Price

‘The bitterness of poor quality remains long after the sweetness of low price is forgotten.’

Benjamin Franklin had a point when he coined that phrase. As with most things, it’s highly recommended not to attempt to save when investing in your latex mattress – you do spend about one-third of your life in bed.

This brings us to the question of budget and durability. If you do not have a lot to spend, you might have to go for a mattress on the cheaper side like a hybrid made of synthetic and natural materials. The prices for these can be as low as $300 to $600.

Another small hint: check the terms and conditions on the website for the return policy because latex mattresses are not easily found in a conventional store.

However, it is worth saving for an all-organic version costing between $700 and $5,000 and beyond. When it comes to this type of sleeping surface, it’s all about the material composition.

It increases the lifespan, reduces and sometimes eliminates off-gassing, and offers better formability and more.

Surface

The latex sleeping surface is moldable, making it ideal for side-sleepers and people with backaches without creating a sinking feeling.

The material offers a good place for having sex too.

Like inter-spring, this bed recovers quickly and resumes the original state.

Latex is a hypoallergenic material, keeping dust mites, bed bugs and allergies at bay. And when you’re done with it, it is eco-friendly and biodegradable. Also, the motion isolation is first-rate, but more on that in the next point.

The best thing about these beds is the breathability of the material. It allows for optimum circulation of any body heat and perspiration during the night – This as opposed to the heat retention in memory foam.

Sleeping Partner

If you share a bed with your partner, this material is the highly recommended on the market. We already touched on the point of motion isolation. This type of sleeping surface absorbs any movement you make to allow for a peaceful sleeping experience.

Your partner will remain on cloud nine because he or she will hardly notice that you have moved at all. This is especially true for the mattress made with the Dunlop process.

Thinking of having a little fun in the bedroom. We already touched upon the fact that the surface is bouncy and reactive, making it ideal for the more frolicsome among you – in short, it is perfect for sex thanks to a quick recovery after the application of pressure to the surface.

Last but not least, this kind of bedding can be individualized if needed. Your partner can have a different firmness to you, allowing for optimum comfort for two.

Who is Latex Best For?

Side Sleepers

There are two types of side sleeper. On the one hand, there are those people that adopt the fetal position with curled arms and legs pulled in the direction of the body, and then there is the ‘log’ position, consisting of lying fully extended on the bed with a slightly bent back.

Both of them have one major thing in common: It is curvier and adds more isolated pressure to certain body parts because of gaps between the body and the sleeping surface. In other words, the shoulders and hips require a degree of giving and support.

To make a long story short, slide sleepers love latex mattresses on their beds and there are many benefits of side-sleeping positions.

The reason is simple – they have excellent molding properties that form to the natural shape of your body, relieving the pressure points.

You will find that your entire frame is supported in all the right places, making back pains caused because of your sleeping position a thing of the past.

Back

This one is generally considered the best sleeping position. You either lie straight on the sleeping surface or in a starfish position with your legs and arms spread out to the sides.

Both of them are good for the back. However, sleeping on your back can lead to snoring.

Pressure is evenly distributed across your whole body. The only part that has no contact with the sleeping surface is the lumbar area on the back. Like the rest of the body, it needs to be supported.

What you have to bear in mind when choosing what to sleep on is your weight. It will determine the firmness. Both Dunlop and Talalay latex distribute body weight well, providing the greatest support for the back.

Stomach

‘Yummy, yummy, yummy, I’ve got love in my tummy.’

There are many people out there that love to sleep on their front. It gives off a sense of comfort and coziness in the bed. This is because the whole body touches the sleeping surface, leaving no recessed areas like when you sleep on your back.

How firm a bedding do you require is the key question here. Is it too soft then the lumbar area on the back will be strained.

A hard surface is an excellent option. But also, you need moldable properties to avoid making an unnatural curve to the back.

If you have been paying attention so far, you are already aware that the latex mattress is ideal. It has all of the properties required for back sleepers. The moldable, breathable surface with excellent weight distribution will provide you with the best night’s sleep.

Pros & Cons

Pros

You have already seen many positives throughout this article. Now, we want to display them in a brief and easy manner and weigh them out with some of the cons, so that you can make the best buying decision.

• It is extremely pointed elastic with a long lifespan. In theory, a latex mattress can last you a lifetime.
• Hypoallergenic – Due to the use of all natural fibers or hypoallergenic foams used in the production process, dust mites, mildew and other allergy-inducing particles don’t have a place to rest.
• Heat transference – The surface is breathable and absorbs and process perspiration in the night, maintaining an optimal temperature.
• Excellent molding properties – Body weight is evenly distributed, reducing pressure points on the joints.
• They can be eco-friendly – If sourced from all organic rubber materials, biodegradability is a given. You will be doing your part to help the environment in your sleep.
• Great motion isolation – Although not as good as memory foam, your partner will hardly notice it when you shift your position during the night.

Cons

Yes, this comes as no surprise – There are some things that are not ideal, but for clarity sake needs to be presented.

• Almost only obtainable online – For the traditional bedding shoppers among you that do not enjoy the online experience, it can be almost impossible to source the latex sleeping surface in a bricks-and-mortar store. This makes it difficult to try them out before buying. However, vendors do offer very generous trial periods and warranties.
• Off-gassing – The first day or days of being a proud new owner of latex bedding can be trying. During the production process, harmless volatile organic compounds (VOC’s) are created. They are the cause for the offensive rubbery smell in both the synthetic and organic options. Small hint: Make sure you air the mattress properly, and it will go away.
• Expensive – Depending on the material, these beds can cost a lot.

Type of Latex Materials

Natural (Organic)

Natural latex is obtained from the juice of the rubber tree in Southeast Asia and West Africa, then mixed with stabilizers and foamed with pure air.

Then, the mixture is poured into a mold with heating rods (holes for air circulation and better point elasticity) and baked, where the molecules combine by vulcanization and are formed into a sturdy and elastic material.

Natural latex has the disadvantage of having quality fluctuations due to the weather conditions in the area where they are sourced, which is why many manufacturers offer mixed products, whereby the uniform quality is guaranteed.

All natural therefore means to be free of any synthetic materials, which is somewhat misleading, as it is not technically possible to produce the raw material without the addition of other auxiliaries such as preservatives, foaming agents, vulcanizing agents and anti-aging agents.

However, when all organic is touted, the preservatives mentioned above amount to only five percent of the composition.

Synthetic

The synthetic version is a pure oil product made up of petrochemicals but has the advantage of maintaining constant quality and is free of any pollutants.

Synthetic latex refers to elastic polymers that are produced on the basis of petrochemical raw materials. The most important synthetic rubber is styrene-butadiene rubber.

The synthetic raw rubber comes in the form of a white, crumbly and plastic mass, which can be processed and vulcanized in the same way as natural rubber.

Compared with the properties of natural rubber that can only be influenced to a limited extent, synthetic rubber grades can be precisely tailored to the application and its requirements by selecting and shaping the starting materials and the molecular structure, i.e., the construction of the polymer. Also, synthetic rubbers are superior to its natural counterpart in wear resistance, vulcanization ability, and aging.

Blend

Synthetic material is often mixed with natural latex in a specific ratio. Corresponding mattress cores can consist of up to 60% natural latex.

The more natural elements added, the better the restoring force. The firmness can, in turn, be better determined, the higher the synthetic content.

For people with high body weight, it is advisable to choose a combined sleeping surface with one or more layers of coconut rubber. These layers provide improved support for the mattress and maintain the optimal adaptability of the surface.

It is also the top-rated bedding for children and teenagers, because of the durability, hygienic properties, and firmness. You can quickly clean it.

Another reason why the blend is the most commonly sold variant in the US is the price. You can purchase a good product for a relatively small cost compared to the all-natural option.

Talalay Vs. Dunlop

The Dunlop process is most commonly used. It was developed in the 1920s. The tough latex raw material is mixed with various additives and then foamed with air. This creates a stable, but still liquid foam.

The density of the core is determined by the amount of air supplied. The more air, the lower the volume weight. The trapped air bubbles provide the open-cell structure typical of latex cores.

Then the foam is poured into a mold with heating pins. The heating pins ensure even heat distribution. In this form, the rubber foam is baked using water vapor and the pins.

Talalay latex is known for its long life.

This procedure was developed around ten years after the Dunlop process and adds two precursors to the vulcanization process. Therefore, it is also referred to as the ‘extended Dunlop method.’

The Talalay method is regarded as the most elaborate and therefore most expensive production process. Also, the energy consumption is considerably higher.

The raw material mixture is only lightly beaten and poured into a mold with metal pins. Then, a vacuum is generated, whereby the rubber mixture is optimally distributed. Subsequently, the mass is flash frozen in the frame to about -22 ° Fahrenheit.

This freezing preserves the round shape of the cell membranes and creates the typical, open-pored structure of the cores.

Finally, a mixture of carbon dioxide and air is pumped through the pins into the frame, which gels the gutta-percha composition and provides some pre-strength. Now the mold is heated to 239 ° Fahrenheit in the so-called vulcanization process. The core solidifies and maintains its final shape.

Latex Vs. Other Materials

Memory Foam

Memory foam is a soft material with high point elasticity and excellent pressure relief, see our best picks. Originally from space research, it is now used in combination with other materials that allow for a ‘weightless’ feeling and is ideal for people with orthopedic problems or muscle tension.

The upper layer is made of thermoelastic foam. This adapts precisely to your body shape, hence the name ‘memory foam.’ If you press your hand into the viscous foam, an impression will remain for a few seconds on the bedding; the so-called ‘memory effect.’

The body is therefore always optimally supported in a pressure-free and almost weightless lying state.

The potency of the foam depends on the temperature: the warmer, the softer it gets. The ‘weightless effect’ thus comes about when the mattress is heated by the body.

Small tip: A short testing in a bed store will therefore not result in an in-depth analysis.

As a rule of thumb, the thicker the foam layer, the more ‘floating’ feeling you will get, but movement becomes more strenuous. If you do not mind the heat generated by the surface, memory foam is a viable and good value option.

However, this is a one hundred percent man-made product. Also, if you prefer a firmer surface and more bounce, memory foam just won’t do the job – Instead, you will feel as if you are sinking into your bed.

Innerspring

For all you traditionalists out there – it’s probably the mattress your parents slept on, and they are still the most prominent on America’s beds.

Innerspring mattresses are probably one of the most popular types around. One differentiates between the Bonnel spring and the pocket spring mattresses. But, springs are weighty and are difficult to transport.

For the Bonnel spring option, the springs are connected to each other, providing a very elastic area that resonates when moving.

The pocket spring core is high quality because the feathers are individually packed in pockets and react with point elasticity.

Pocket spring responds individually to pressure applied by the body with high point elasticity. Due to the springs, there is also good ventilation. The sleeping environment is additionally favored by the right moisture removal.

Since the springs are usually very robust, they are also durable and resilient. An expensive slatted frame is often not needed since a pocket spring mattress already forms a stable surface.

It can, therefore, be said that innerspring’s excellent cooling properties are well suited for people who suffer from sweating during sleep. It is not without reason that most XXL mattresses are spring mattresses.

They are stronger and thus offer comfortable sleeping comfort if you are on the heavy side. Thanks to the individual feathers, they adapt well to stomach, back and side sleepers.

Gel

Gel foam or gel is elastic, temperature-neutral and extremely durable. Gel mattresses in the true sense of the term are sleeping surfaces that are filled with a viscous, heavy gel and work much like a waterbed.

Gel relents on pressure and adapts ideally to the contours of your body. As a result, the spine is optimally and ergonomically positioned. Also, the precise body adaptation ensures that the muscles can relax.

If the pressure lapses, the material immediately returns to its original form. It is therefore useful for people who often turn around in their sleep and roll back and forth. It does not matter if the sleeper is lying on his back or his or her side.

With a corresponding zone structure of the supporting core part, gel foam is also suitable for persons with strongly varying body contours, since it adapts elastically at every point. But it is not ideal if you are slightly on the heavy side.

Allergy sufferers and asthmatics also benefit from gel sleeping surface because they are resistant to dust mites. The open-pored structure of the gel foam ensures a good and balanced sleep climate.

Even those who sweat a lot at night will feel comfortable sleeping on a gel bed.

Hybrid

The hybrid combines the power and support of a spring system with the adaptability of memory foam. You should look take a look, the arguments for a sleep system of this kind is convincing.

The hybrid mattress offers the perfect balance of soothing relief and ergonomic support. The combination of two proven sleeping technologies creates an entirely new feeling of lying and allows for immediate relaxation.

Also, benefit from the excellent air circulation of the pocket spring core coupled with the optimal body adaptation of the cold foam. Some claim that it is sleeping comfort of the extra class!

That is because of the coils that provide extra support in relation to alternating between softness and firmness in all the right places. If you are a side sleeper, you will love it. And don’t worry about the coils, a memory foam layer makes sure they don’t poke or make any noises in the night. Round it off with the low cost; this one might be the one for you.

But before you rush to your computer to order one for your bed, be aware that the gel is very heavy. Also, when you move during the night, it can wobble due to lacking motion transfer.

Top 3 Latex Bed Reviews

Saatva, the popular, online upmarket brand, produces the Zenhaven. And believe us when we say that it beats any price you can find in a traditional bricks-and-mortar store for a comparable luxury-sleeping surface for beds.

But what got us interested was the two-in-one possibility the company touts in their marketing. It did not disappoint. You can choose a side and discover which one is top-quality for you in terms of firmness and body-shaping.

Made out of all natural components such as American Talalay latex, organic cotton, and wood, this product can change your sleeping experience, and it is built to last. This is not a mere boast. The company goes as far as to offer a whopping 120-day trial period and a 20-year warranty.

If you like homegrown products, you can’t go more American than this baby. After you have placed your order online, your new mattress will be delivered to you by a dedicated team and set up in your bedroom.

Want to find read more about Zenhaven? See our full analysis here.

This hybrid mattress is a revolutionary take on sleeping comfort based on 35 years of experience in the bedding business. The company prides itself on alleviating pains and stress relief by providing a good night’s sleep in the ideal position.

If you tend to get hot during the night, look no further. The best combination of foam and latex ensure breathability and dissipation of accumulated body heat.

And to top it all off, this mattress is well worth the money and it comes with a 365-night trial period and a 25-year warranty. They can get away with it because of the guaranteed durability of their product. Another plus is that when you move at night, you won’t notice the transfer of weight thanks to the special alternating layers.

However, if you are someone who does not appreciate a somewhat firmer sleeping surface, this one might not be the best alternative for you.

For a much more in-depth overview, read our completed Ghostbed review here.

If you want to go natural and sleep on organic materials, this product, fabricated in sunny California, goes all the way. This sleeping surface ideally supports all of the pressure points on the body, reducing pain and de-stressing joints. Your hips, shoulders, and back are always in perfect alignment.

The 100 percent Dunlop latex sourced from trees promises to keep your mattress free from gassing. They do it so well that Avocado carries the GreenGuard Gold Certification issued by UL Environment. In other words, they meet some of the world’s most stringent emissions regulations for pollutants that foster chemical exposure.

You are not only paying for coziness and relaxation. The Avocado is also a good value item with an extended warranty of 25 years and a free pick-up and replacement service within the first ten years. The only thing we can say against this product is that if you do not like firmer sleeping surfaces, the Avocado might be too hard.

We have a much more information on Avocado. You can see our overview here.

Our Final Thoughts

Now, you should be well equipped with all the necessary information. In other words, you are well on the way to being an expert on the subject. It’s crucial because catching the right amount of quality ZZZ’s not only improves health, but it also will enhance your lifestyle.

Whether to go for a latex mattress that is best for you, it’s your decision. Some people swear by them due to the many advantages we listed in this article. Be aware that the depth is of vital importance:

The highest quality products on the market will have a solid core and be fully rotatable. All in all, sleep well on a bed that lasts.